Dexter Replacement Axle Specialist *** Replacement Axles Delivered Fast
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hubs - 7,200 LBS Capacity
Hubs - 7,200 LBS Capacity
 |
Select Part Number to View & Order Online
| Part # | Description | Item # | Dexter # |
| 27-352-2 | Seal | 1 | 010-036-00 |
| 27-326 | 25580 Inner Bearing | 2 | 031-030-02 |
| 27-327 | 25520 Inner Race | 3 | 031-030-01 |
| 27-333 | 02420 Outer Race | 4 | 031-028-01 |
| 27-332 | 02475 Outer Bearing | 5 | 031-028-02 |
| 27-092 | Bearing Kit | NOT SHOWH | |
| 27-056 | Spindle Nut | 6 | 006-176-00 |
| 27-027 | Cotter Pin (not used on E-Z Lube) | 7 | 019-002-00 |
| 27-372 | Grease Cap | 8 | 021-039-00 |
| 27-372-2 | Grease Cap - E-Z Lube | 8a | 021-043-01 |
| 27-379 | E-Z Lube Plug | 8b | 085-001-00 |
| 27-373 | Oil Cap | 8c | 021-035-00 |
| 27-377 | Oil Cap Plug | 8d | 046-032-00 |
| 27-059 | Spindle Washer | 9 | 005-057-00 |
| 27-388-1 | 5/8”-18 Press-in Stud | 10 | 007-224-00 |
| 27-385-1 | 9/16”-18 Press-in Stud | 10 | 007-223-00 |
| 27-032 | 9/16”-18 Cone Nut (60 degree) | 12 | 006-053-00 |
| 27-032-2 | 5/8”-18 Cone Nut ( 90 degree) | 12 | 006-109-00 |
| 27-032-1 | 5/8”-18 Flange Nut | ns | 006-058-00 |
| 27-378 | Oil Filler Plug | 14 | 046-052-00 |
| 27-375 | O-Ring for Oil Lube | 16 | 010-045-00 |
| - | Dust Shield | 17 | 036-118-00 |
| (not included in brake assembly) - After May 2000 | |||
| 27-479 | Dust Shield Top | 17 | 036-110-00 |
| (not included in brake assembly) - Before May 2000 | |||
| 27-479-1 | Dust Shield Bottom | 17 | 036-110-01 |
| (not included in brake assembly) - Before May 2000 | |||
| n/a | Brake Assembly | 20 | |
| 27-307-B | Hub - 8-6.5” Brake (grease, 9/16”stud) | 24 | 008-393-04 |
| After May 2000 | |||
| 27-307-1-B | Hub - 8-6.5” Brake (grease, 5/8” stud) | 24 | 008-393-06 |
| After May 2000 | |||
| 27-307-B/OIL | Hub - 8-6.5” Brake (oil, 9/16” stud) | 24 | 008-393-03 |
| After May 2000 | |||
| 27-307-1-B/OIL | Hub - 8-6.5” Brake (oil, 5/8” stud) | 24 | 008-393-05 |
| After May 2000 | |||
| 27-306-B | Hub - 8-6.5” Brake (grease, 9/16”stud) | 24 | 008-355-13 |
| Before May 2000 | |||
| 27-306-1-B | Hub - 8-6.5” Brake (grease, 5/8” stud) | 24 | 008-355-15 |
| Before May 2000 | |||
| 27-306-B/OIL | Hub - 8-6.5” Brake (oil, 9/16” stud) | 24 | 008-355-12 |
| Before May 2000 | |||
| 27-306-1-B/OIL | Hub - 8-6.5” Brake (oil, 5/8” stud) | 24 | 008-355-14 |
| Before May 2000 | |||
| 27-057-3 | Special Jam Nut (after 2002) | 28 | 006-191-00 |
| 27-061 | Spindle Nut Retainer (after 2002) | 29 | 006-190-00 |
Note: Change from stamped backing plate to cast backing plate made in May of 2000
|
Nev-R-Lube Hub
|
Nev-R-Lube Hub
| Part # | Description | Item # | Dexter # |
| 27-457-1 | LH Complete Brake Assembly, 4 Bolt - After May 2000 | 20 | 023-428-00 |
| 27-456-1 | RH Complete Brake Assembly, 4 Bolt - After May 2000 | 20 | 023-429-00 |
| 27-060-3 | Spindle Washer | 3 | 005-149-00 |
| 27-057-2 | Spindle Nut | 4 | 006-183-00 |
| 27-365-1 | Washer, Torque Label | 5 | 092-002-00 |
| 27-365 | Snap Ring | 6 | 069-096-00 |
| 27-372-4 | Grease Cap | 8 | 021-086-00 |
| 27-474-M | Dust Shield | 10 | 036-115-20 |
| Hub & Drum 8-6.5” (9/16” stud) Kit | |||
| Kit includes: | |||
| 27-385-1 | 9/16” Press-in Stud | 24 | 007-223-00 |
| 27-366-2 | Bearing Cartridge - 50 mm | 24 | 031-071-03 |
| 27-367-2 | Bearing Retainer | 24 | 069-093-00 |
| Hub & Drum 8-65” (5/8” stud) Kit | |||
| - Kit includes: | |||
| 27-388-1 | 5/8” Press-in Stud | 24 | 007-224-00 |
| 27-366-2 | Bearing Cartridge - 50 mm | 24 | 031-071-03 |
| 27-367-2 | Bearing Retainer | 24 | 069-093-00 |
| 27-032 | 9/16”-18 Cone Nut (60 degree) | 12 | 006-053-00 |
| 27-032-2 5 | /8”-18 Cone Nut (90 degree) | not shown | 006-109-00 |
| 27-032-1 | 5/8”-18 Flange Nut | not shown | 066-058-00 |
Note: Change from stamped backing plate to cast backing plate made in May of 2000
 |
Copyright 2008-2023 © Dexter Parts Online
Greenville, SC
DexterParts@live.com